First, enterprises are innovations.
1997, 424 countries applied the existing Institute of decentralization, transfer rate, allowing the Institute to retain the original name, because of its technical personnel, strong technical force,glue stick can participate in national research projects in the bidding.
Is also the industry Quality Supervision, Inspection Center, Standardization Technical Committee, the center support unit for the measurement. Since the implementation of this measure state the date,glue gun it means that in China's socialist market economy, enterprises will become the main product research and development.
Enterprises should continue to develop, construct old enterprise, but to innovate, and constantly develop new products with independent intellectual property rights, be invincible, can not only be large and as strong. National policy guidance, but also with international standards (R & D in foreign enterprises is the main body). Therefore, the development of new products and business standpoint is the enterprises themselves.
Three years of reform and opening up the actual core technology that can not be bought. The most typical example is the automobile industry, for our first joint venture with foreign production, foreign capital, tried to market for technology, with the money to buy technology, but people really advanced and proven core technology for less than you are and can not be bought . Thus, while the annual output of cars in China more than 1300 million, but the only big country in the world car production only, not power. Own intellectual property rights and core technologies, some of its profits in China accounted for only 30%.
Gree's proven, you do not have technical strength, to have strong enterprises with foreign co-development of no engaging the door. Like air conditioning technology was introduced from Japan, others flatly refused to even spare parts are not sold, is the joint venture is also a technology, brand shares, others very little risk. This determination research, has established nearly 300 specialized laboratories, covering many areas of domestic and commercial air conditioning, no matter the number, size, or skill level are in the world leading level, has developed a multi-air conditioning Inverter, DC Inverter Air conditioning. Now has nearly 2,000 items of patent technology, nearly 300 patents, since 2005 sales of air conditioning products in the world, a world famous brand, to large enterprises on an equal footing with the foreign (joint venture with Daikin plant are both capital investment ; with Viet Nam, Pakistan sign joint-venture factories, Gree brand and technology investment company). So Gree Electric Co., Ltd. business manager Dong Mingzhu say: "No matter how great importance to innovation that can not be overstated."
Two, coated abrasives industry in China by the "big" to "strong" is the age confers the history of corporate social responsibility and life.
China abrasives industry from scratch, from small to large, from the development point to a plane, in particular through three decades of reform and opening up of industrial abrasives has been rapid development in 2008, annual output of nearly ordinary abrasive 2 million tons; export 69-70 million tons of brown fused alumina abrasives; abrasive export about 15 million tons, according to the world.
Superhard materials such as diamond produce 5.69 billion kt in 2009, accounting for more than 80% of world production; diamond, cubic boron nitride production from raw materials, equipment, technology, products, products have complete independent intellectual property rights, is worthy of the world superpower. Zhengzhou International Superhard Materials Symposium to commemorate the birth of my diamond from the 1988 state by the Zhengzhou Institute of Abrasives Grinding organized held every five years, from first to fifth, the size of their seminar time than a large one more than one participating countries, has now become an international brand conference;
Coated Abrasives annual 332 million square meters in 2008, production in the world.
China-made coated abrasives conversion equipment export to the United States, Japan, Canada, Russia, South Korea, Taiwan, Vietnam, Thailand and other developed and developing countries and regions. This is the Chinese people proud of coated abrasives.
But in our excitement, the excitement, calm down and when to do deep thinking. Will find our still a big gap in China is recognized as "world manufacturing power," but not "create the world's largest country", not "the world's manufacturing power." Worse still is the "Made in China" has become a low-quality, low price of synonymous; in the Ministry of Land and the Internet have an article entitled "China's mineral exports need to eliminate the" first-class resources, second processing, third-class price "and" The article, the use of cheap foreign resources in China, in turn, anti-dumping measures imposed on my country, my constantly being anti-dumping lawsuits, anti-dumping duties (from 2.7% to 33%, up to 134%). This is a great harm to our industry. Therefore, we needed to increase the technology content of products, improve product quality, increase product added value, change the "clean win", "quantity of win" as "winning by quality." Breakdown products, sub-users, to develop special products targeted, personalized products, the implementation of different development strategies. Some of our industry is product quality should be good, but no brand, or brand awareness is low, this is some of the reasons for enterprises OEM. OEM business enterprises of the financial crisis also affected, but also a new starting point for enterprises to create their own brand. Some strong enterprises can also set up factories abroad, but must pay attention to corporate output, capital output, technology export, brand output when synchronized.
Believe that our coated abrasives industry, entrepreneurs must become reconciled to only low-quality, low-cost product manufacturing power and status, not willing to coated abrasives are still hundreds of millions of high-end market share taken away by anyone. Change "coated abrasives manufacturing country" as a "coated abrasives manufacturing power," the times confers China Coated Abrasives enterprises, entrepreneurs, responsibility and mission. Coated abrasives in China who can make our coated abrasives industry from scratch, from a point to face, from small to large, there must be able to do by the "big" to "strong" change. Innovation, development of independent intellectual property rights in full possession of our products, increase product added value, pushing the brand products have independent intellectual property rights in China, the brand is a combination of quality and technology, future products, the brand effect will become increasingly evident. Brand is to make coated abrasives industry in China by the "big" to "strong" golden key.
Now China is engaging in "12 5" plan, sincerely hopes that coated abrasives industry under the leadership of business associations do a good job in the coated abrasives industry planning. Blew our coated abrasives industry to power of the clarion call.
Third, our coated abrasives industry by the "big" to "strong" fundamentals.
1, the qualifications required within the industry: our coated abrasives business after three decades of reform and opening up and development of vigorous training, many larger companies, such as Hubei Yuli, Jiangsu, Mitsubishi (R & D center coated abrasives and industrial base has been ground-breaking), the Far East, Suzhou, Shandong Bosch, pigeons, small sun so that they not only understand the market, familiar with the market, enterprises with foreign counterparts are more understanding, but also a certain accumulation of capital and technical reserves, more crucial is that they train on a group of skilled business talent in management and professional technical personnel, they both R & D funding, has product development, technological strength.
2, to foster the establishment of an expert marketing team: business development of new products will have professional technical team, an engineer, senior engineer; corporate R & D results to ensure the conversion into products, the need for technical workers, medium workers, senior workers, technicians to achieve. However, the choice of business innovation will have to come from enterprise applications. The most contact on the application of industry to understand when the largest sales of enterprise products, such as the enterprise has an expert sales team will be more accurate feedback on application of industry information, such as enterprise application requirements of product quality, product use equipment and conditions, product number or size, prospects of manufacturing products 开发 been calculated on project decisions to provide more accurate and reliable in the Xin Xi. Also the business from production to the changing needs of production service type.
3, to support for national policy: as a national trade association - Association of China Machine Tool Industry Branch of coated abrasives for the state's policy to actively support the next generation of non-responsibility. When it comes to abrasives industry, there will always be the high energy consumption, high pollution and resource-based "two high and one Capital" products linked to coated abrasives industry do not enjoy preferential treatment such as export tax rebates. To actively reflect to the relevant state departments, coated abrasives industry does not belong to the two high and one asset industry, its products are not high and one of two investment products. From the manufacturing process, raw materials used are explained. Also guide enterprises to seek more environmentally friendly adhesive material, such as inorganic polymer binder.
4, support for Government Innovation Fund
Hu Jintao in 2010 "to create world peace and development of a better future," New Year message, say: According to the new situation and new focus on improving the policy relevance and flexibility, greater attention to improving the quality and efficiency of economic growth, more emphasis on ways to promote economic development changes and economic restructuring, more emphasis on promoting reform and opening up and independent innovation and enhance economic growth, vitality and power. National Innovation Fund for Small and Medium set, see: High-tech SMEs technology innovation fund network, equipped with fund profiles, fund documents and other columns Innovation Fund every year, enterprises should pay attention to links with the local science and technology department, some new product development project to project review report, for support.
We believe that through the joint efforts of coated abrasives industry, will be accompanied to the early realization of China's coating industry power goals.